Last reviewed · Works with Xbox, PlayStation, Nintendo Switch Pro and generic USB controllers
Quick answer: connect your controller, press any button, and the tester shows every button, trigger and analog stick axis live. With the sticks untouched, both axes should sit at or very close to 0.0000. A clearly non-zero value at rest is the signature of stick drift.
How to Test a Controller Online
- Connect your controller with a USB cable or pair it over Bluetooth.
- Press any button, for example A or Cross. Browsers only reveal a controller after you interact with it.
- Check the details panel: name, index, mapping (a standard mapping is ideal) and connection status.
- Press each button and trigger. The Buttons Data grid shows values from 0.00 to 1.00, so analog triggers show partial values as you squeeze them.
- Move both analog sticks and read the four axis values, then release them and check the resting values.
How to Test for Stick Drift
- Look at the Analog Sticks section and let go of both sticks completely.
- The X and Y values should rest at or near
0.0000, and the dot inside each circle should sit in the center. - Tiny readings such as
0.01to0.03are common sensor noise, and most games hide them with a built-in deadzone. - If the dot stays visibly off-center or the readings stay well above that range, for example
0.10or more, the stick is drifting and you will probably notice the camera or character moving on its own. - Repeat the test after pushing the stick around its full circle and letting it return, because some sticks only drift after being moved.
What the Axis Values Mean
Each stick has two axes: X (left and right) and Y (up and down). Values range from -1.0000 to 1.0000, where the extremes mean the stick is pushed all the way over. Axes 0 and 1 normally belong to the left stick, and axes 2 and 3 to the right stick.
Using the Circularity Test
Press Test Circularity and slowly move a stick around its outer edge. The path should form a smooth, even circle. A flattened or lumpy shape means the stick cannot reach full range in some directions, which matters in racing games, flight simulators and fighting games where precise angles count.
Supported Controllers
| Controller | Connection | Notes |
|---|---|---|
| Xbox One / Series X|S | USB, wireless adapter, Bluetooth | Reports a standard mapping in current browsers. |
| PlayStation DualShock 4 / DualSense | USB, Bluetooth | Press a button after connecting to wake it. |
| Nintendo Switch Pro | USB, Bluetooth | Button layout may differ from the labels shown. |
| Generic USB gamepads | USB | May report a non-standard mapping; values still show correctly. |
The tester uses the browser's Gamepad API, which is available in current versions of Chrome, Edge and Firefox. Support in other browsers can vary.
How to Fix Stick Drift
- Clean it: blow compressed air around the base of the stick and rotate it to loosen dust.
- Recalibrate: use your platform's calibration option, for example Windows Game Controllers settings or Steam Input.
- Adjust deadzone: many games let you raise the stick deadzone, which hides small amounts of drift.
- Check your warranty: if the controller is still covered, ask the manufacturer for a repair or replacement.
- Replace the stick module: worn analog potentiometers can be swapped, or upgraded to Hall-effect sticks that are designed not to wear in the same way.
Controller Not Detected?
- Press a button after connecting; browsers hide controllers until the first input.
- Close Steam, console companion apps or emulators that may be holding the controller exclusively.
- Try a different USB cable or port. Some cables are charge-only and carry no data.
- For Bluetooth, remove the device and pair it again.
For a complete peripherals check, also run the keyboard tester, the mouse tester and the monitor test.
Frequently Asked Questions (FAQ)
Why is my controller not detected?
Make sure it is connected by USB or Bluetooth, then press any button such as A. Browsers only detect controllers after the first input, for security reasons. If it still does not appear, try another cable or port and close other apps that may be using it.
What is the Test Circularity button?
It is a mode for drawing a full circle with an analog stick. It checks whether the stick reaches maximum values evenly in every direction, which matters in fighting, racing and flight games.
Is this tool safe?
Yes. Controller data is processed locally in your browser's memory and is never sent to our servers.
What values count as stick drift?
A stick at rest should read very close to 0.0000. Tiny values are normal sensor noise and are usually hidden by a game's deadzone. Readings that stay clearly above that, or a dot that rests visibly off-center, indicate drift.
Can I test PS5 and Xbox controllers?
Yes. DualSense, DualShock 4, Xbox One, Xbox Series and Switch Pro controllers are all detected when connected by USB or Bluetooth.
Why do my trigger values show decimals?
Analog triggers report how far they are pressed, from 0.00 (released) to 1.00 (fully pressed). Digital buttons show only 0 or 1.
Does the tool work on mobile?
It can, if your mobile browser supports the Gamepad API and you pair a controller over Bluetooth. Desktop browsers give the most reliable results.