Last reviewed · Works with monitors, laptop screens, TVs and gaming displays
Quick answer: pick a test pattern, enter full screen, and look closely at the whole display. Solid colours reveal dead and stuck pixels, black reveals backlight bleed, and gradients reveal colour banding. The browser cannot detect defects automatically, so you are the sensor. That is why the patterns are designed to make faults easy to see.
How to Run a Monitor Test
- Clean the screen with a dry microfibre cloth. Dust and fingerprints look like faulty pixels.
- Set the screen to its native resolution and normal brightness.
- Choose a pattern in Select Test Pattern and click Click to Fullscreen. Press Esc or use the exit button to leave full screen.
- Or press Start Auto Cycle to rotate through the patterns automatically every few seconds while you inspect the screen.
- Look at the whole screen at a normal distance, then move closer to check the corners and edges.
Dead Pixels, Stuck Pixels and Hot Pixels
A dead pixel stays black on every colour because it is not receiving power. A stuck pixel stays fixed on one colour, typically red, green, blue or white. A hot pixel is a pixel that stays bright white. Cycling through the red, green, blue, white and black screens makes each type stand out: a dead pixel is easy to see on white, while a stuck or hot pixel is easiest to see on black.
Test Patterns Explained
| Pattern | What it reveals | How to judge it |
|---|---|---|
| Red, Green, Blue | Stuck pixels and sub-pixel faults | Look for dots of a different colour. |
| White | Dead pixels, dirt, uneven brightness | Any dark dot or tinted patch is a defect or dust. |
| Black | Hot pixels and backlight bleed | Use it in a dark room; glowing corners suggest bleed. |
| RGB Gradient and Grayscale | Colour banding and tint | A good panel shows a smooth blend without stripes. |
| Grid (Lines) | Geometry and alignment | Lines should be straight and evenly spaced. |
| Checkerboard | Uniformity and image retention | Squares should look equal and clean. |
| Sharpness Grid | Scaling and sharpness | Fine lines should look crisp, not blurred or shimmering. |
| Text Clarity | Sub-pixel and text rendering | Small text should be readable without colour fringes. |
How to Test for Backlight Bleed and Uniformity
Backlight bleed is light leaking from the edges or corners of an LCD, and it is common on IPS panels. Select the Black screen, dim the room lights and look at the corners from a normal distance. A small amount of light at the edges is normal. A bright, fixed patch that is clearly visible is bleed.
Be careful not to confuse bleed with IPS glow. IPS glow is a soft sheen that moves or fades as you change your viewing angle, while bleed stays in the same place. For uniformity, check the white and gray screens for darker or tinted areas; a slightly different tint at the corners is common, but a strong yellow or blue region can justify a return.
Color Banding and Gradients
On the gradient and grayscale patterns, a good panel shows a smooth blend. Visible steps or stripes are called banding and are usually caused by limited colour depth or aggressive picture modes. Turn off dynamic contrast and any "enhance" mode in the monitor menu, then test again to see if the banding was caused by a setting.
Buying a New Monitor? Use This Checklist
- Run the monitor test immediately, while you are still inside the return window.
- Check the manufacturer's pixel policy. Many follow classes defined by ISO 9241-307, and rules differ between brands and models.
- Photograph any defect on a black or white screen as proof for the seller.
- Test in a dark room for bleed and in normal light for uniformity.
What This Tool Cannot Measure
A browser-based test is great for spotting visible defects, but it cannot measure refresh rate, response time, brightness in nits or colour accuracy. For those you need dedicated hardware such as a colorimeter, or the tests built into your monitor and graphics driver. On OLED screens, avoid leaving a static pattern on screen for long periods.
Setting up a full desk? Also check your keyboard, mouse and microphone with the other FreeCheck tools.
Frequently Asked Questions (FAQ)
Can this tool automatically detect dead pixels?
No. Web browsers cannot read raw display hardware data, so they cannot find dead pixels automatically. The tool provides high-contrast patterns and you inspect the screen with your own eyes.
Can I fix a dead or stuck pixel?
A stuck pixel can sometimes be freed by running a pixel-refresh pattern for a while, or by gently pressing the spot with a soft cloth while the screen is on. Use very light pressure to avoid damaging the panel. A truly dead (black) pixel normally needs a panel replacement.
What is the Auto Cycle feature?
Auto Cycle changes the test pattern automatically every few seconds. It is the fastest way to run through every pattern without clicking.
How do I exit full-screen mode?
Press the Esc key, or click the Exit Fullscreen button shown at the top right of the screen.
Is backlight bleed normal?
A little light at the edges is common on LCD panels, especially IPS. Whether it is acceptable depends on how visible it is in a dark room and on the seller's or manufacturer's return policy.
Will the test damage my screen?
No. The patterns are ordinary full-screen colours and shapes. As with any static image, do not leave a single pattern running for hours on an OLED display.
Does the tool work for laptops and TVs?
Yes. Any screen with a modern browser can display the patterns, including laptops, desktop monitors, tablets and smart TVs.